Canon NP6551 Operator's Manual page 114

●
When using the Sheet Insertion function to add
sheet insertions when making 2 → 2-sided copies*
or using it for "Chapterization" when making 1 → 2-
sided copies, the sheet insertions/chapter headings
are inserted as follows:
■ When the sheet insertion /chapter heading is
inserted at an odd numbered page
(In the example the insertion sheet/chapter heading
is inserted at page 5.)
Copies
■ When the sheet insertion/chapter heading is
inserted at an even numbered page
(In the example the insertion sheet/chapter heading
is inserted at page 4. As a result of this, the back of
page 3 is left blank.)
Copies
* Sheet insertions can also be added to copy sets
when making 1 → 1-sided copies.
Select the paper feeding locations for each
5
insertion sheet, then press the [OK] key.
MEMO:
●
Select the same paper size for the front and back
cover and the insertion sheets.
●
The display will vary depending on the mode
selected.
After you have finished making the settings,
press the [DONE] key.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO: ●
To cancel the settings, press the [SPECIAL
FEATURES], [COVER/SHEET INSERTION], and
[C] keys in that order.
●
You can also cancel the mode by pressing the
key. (The copier returns to the Standard mode.)
1
3
Insertion
sheet
2
4
1 3
Insertion
sheet
2
5
6
4
5
Reset
3-17