Front Access Sorter Unloading; High Speed 1→2-Sided - Canon NP6551 Operator's Manual

■

Front Access Sorter Unloading

This setting is only available when your copier is
equipped with the optional Stapler Sorter. This function
automatically outputs copies to the front of the copier
after sorting is finished.
ON: Automatically outputs copies to the front of the
copier.
OFF: Does not output copies to the front of the copier.
Select FRONT ACCESS SORTER
UNLOADING.
Select the [ON] or [OFF] key for each setting,
1
then press the [OK] key.
MEMO:
●
Only LTR-size paper can be output to the front of
the copier.
●
The Front Access Sorter Unloading Function default
settings are as follows:
• Sort: ON
• Group: ON
• Staple-sort: ON
• Double Stapling/Stack Delivery: ON
●
If you want to do manual stapling after copying with
the Sort mode , then set SORT to OFF.
●
If you are making 21 or more sets of copies with
LTR-size copy paper and Double Stapling selected
in the Staple-sort mode as a default setting, then the
21st set and others afterwards are not output
immediately. After you remove the 20 sets that
have already been output to the front of the copier,
the 21st set and other remaining sets are
automatically output to the front.
■
High Speed 1→2-sided
Under the following conditions, the pages of the original are
not counted, and copying is done in the High Speed 1→2-
sided mode: when the RDF is used, for 1 or 2 sets of
copies, original size is LTR. (Horizontal size LTRR is not
possible.)
ON: Copies with the High Speed 1→2-sided mode.
OFF: Copies after counting the number of pages in the
RDF. (The count may also be canceled.)
4-7