Adjust the slide guides to fit the size of the
4
original.
Place the side to be copied face down, and
5
insert the original. The original is pulled in and
copying starts automatically.
During copying, the message to the right
appears in the touch panel display.
NOTICE:
●
You can only insert one original at a time into the
SADF tray. If you insert two or more, a paper jam
occurs.
●
If the original is curled, smooth it out completely
before inserting it.
●
If copying does not start after inserting the original
in the SADF tray, press the
copying automatically after inserting the original,
you must change the "Additional Functions"
setting. (See "Additional Functions/SADF Auto
Feed," on p. 4-8.)
MEMO:
●
The original returns to the SADF tray after it has
been copied.
●
If your copier is equipped with a Stapler Sorter/
Sorter, the copies are output to the top tray.
●
If you want to make copies of another original,
programme the new copy settings and insert your
original in the tray again.
Close the SADF tray.
6
If the interrupted copy job was being run using
the platen glass, place the original (that you
removed in step 2) back on the platen glass.
2-36
key. To start
Start