Recalling A Copy Job - Canon NP6551 Operator's Manual

Recalling a Copy Job

Press the [SPECIAL FEATURES] key, then
1
press the [MODE MEMORY] key.
Select the key for the copy job that you want to
2
recall, then press the [OK] key.
MEMO:
●
In the display at the right, modes are registered with
the M1-M5 keys.
Check the registered contents of a key.
3
If the contents are correct:
Press the [OK] key.
If the contents are incorrect:
Press the [C] key. Select another key.
MEMO: ●
Recalling a copy job from memory cancels the
current copy settings, and replaces them with the
copy settings of the recalled job.
●
After recalling a copy job from memory, you can
change the copy settings.
After you have finished making the settings,
press the [DONE] key.
After recalling a copy job, proceed to copy in the
usual manner. (See "Making Copies," on p. 2-4.)
3-44