Adding Toner - Canon NP6551 Operator's Manual

Adding Toner

When there is only a small amount of toner remaining,
the message to the right appears in the display.
Copies can still be made, but at this time you should
purchase new toner so that you have it on hand when
it is needed. If you press the [ADD TONER] key, a
message appears describing how to add toner.
MEMO:
●
When this message appears, aproximately 200 copies
can still be made. However, since this number may vary
depending upon the original, it is recommended that the
toner be replaced as soon as possible.
When the toner has run out and copies can no longer
be made, the message describing how to add toner
appears in the display. Add toner following the
described procedure.
Use only the toner which is intended for use with the
NP6551.
Open the toner supply cover.
1
Hold the toner bottle with both hands and turn it
2
up and down a few times as shown in the figure,
to evenly distribute the toner inside the bottle.
REQUEST:
● Only use the toner which has been approved for use
with the NP6551.
● Never add more than one bottle of toner.
5-9