Binding Erase (Erase Binding Holes On Copies) - Canon NP6551 Operator's Manual

Select the size of the book when opened, then
3
press the [OK] key.
After you have finished making the settings,
press the [DONE] key.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO:
●
To cancel the settings, press the [SPECIAL
FEATURES], [FRAME ERASE], and [C] keys in that
order.
●
You can also cancel the mode by pressing the
key. (The copier returns to the Standard mode.)

Binding Erase (Erase Binding Holes on Copies)

Erases the shadows that can appear in copies from binding holes on originals.
Place your original on the platen glass.
(See p. 2-17.)
NOTICE:
●
Place the original on the platen glass so that the
binding holes are on the right side of the original.
Press the [SPECIAL FEATURES] key, then
1
press the [FRAME ERASE] key.
Reset
3-7