Manual Feeder Cleaning - Canon imageRUNNER Advance 6275 Basic Operation Gude

Manual Feeder Cleaning

If originals that have been fed through the feeder have streaks or appear dirty, clean the feeder's scanning area and the rollers.
Clean the rollers of the feeder with a cloth which is wrung after being dampened in water, and then wipe them clean with a
soft, dry cloth.
• Spin the rollers while cleaning them.
• If the document feed scanning area is dirty, documents may not be scanned clearly, and the size of the document may not be
detected correctly.
This procedure is necessary only if the Duplex Color Image Reader Unit-G1 is attached.
Cleaning the Original Scanning Area of the Feeder
Clean the original Scanning area (thin glass strip).
1
Open the covers.
2
Open the document scan cover carefully, as not to scratch the platen glass.
100
1 Open the feeder.
2 Clean the original scanning
area (thin glass strip) with
a cloth dampened in water,
and then wipe the area with
a soft dry cloth.
1 Pull the lever above the
feeder, and open the
document scan cover.
2 Hold the blue tab above the
inside cover, and open the
inside cover in the direction
of the arrow.