Overlay Mode (Superimposes Two Original Images On A Single Copy Sheet); Book Overlay - Canon NP6551 Operator's Manual

Overlay Mode
(Superimposes Two Original Images on a Single Copy Sheet)
The following overlay copying features are available:
■ Sheet Overlay
Superimposes two sheet originals onto a single sheet of copy paper.
Originals
SCENE

■ Book Overlay

Superimposes facing pages in a bound original onto a single sheet of copy paper.
Original
NOTICE:
●
Set the One-sided mode before copying in the Overlay mode.
MEMO:
●
Non-standard paper sizes cannot be used to make overlay copies.
●
In the Overlay mode, you can enter up to 50 copies for any one copy job, regardless of the
paper size. (This limit is the same as the capacity of the duplexing unit.) If your copier is
equipped with the Stapler Sorter or the Sorter, you can set up to 999 copies when making
copies using the feeder.
●
Copy paper used to make overlay copies must conform to the following specifications:
• Paper size: STMT to 11" x 17" (STMTR-size cannot be used.)
• Paper weight: 17 to 20-lb bond (64 to 80 g/m
There are some types of paper which may meet the above specifications, but cannot be
used to make overlay copies.
Sheet Overlay selected in the Overlay mode
Book Overlay selected in the Overlay mode
2
)
Copy
SCENE
Copy
3-35