Select The Desired Image Separation Feature And Press The [Ok] Key; Memo: ● The Display (Available Features) Differs Depending; On The Placement Location Of The Original. For; If You Selected 1 To 4 / Two-Sided Or 1 To - Canon NP6551 Operator's Manual

Select the desired Image Separation feature
2
and press the [OK] key.
MEMO:
●
The display (available features) differs depending

on the placement location of the original. For

details, see p. 3-25.

■ If you selected 1 TO 4 / TWO-SIDED or 1 TO 4

Select the layout of the last page of the originals

and press the [OK] key.
MEMO:
●
If you select the layout of the last page, then the

copier will not output blank sheets of copy paper.

Press the [PAPER SELECT] key to manually
3
select the copy paper size. (See "Manual Paper
Selection," on p. 2-24.)
NOTICE:
●
You cannot set Auto Paper Selection; manually
select a paper size (see p. 2-24).
MEMO:
●
The copier automatically selects the copy ratio
depending on the selected paper size (Auto Zoom).
After you have finished making the settings,
press the [DONE] key.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO:
●
To cancel the settings, press the
(The copier returns to the Standard mode.)
Reset
key.
3-29