Routine Cleaning; Platen Glass - Canon NP6551 Operator's Manual

Routine Cleaning

Clean the following parts once a week or whenever copies appear dirty.
WARNING:
● When cleaning the copier, first turn OFF the power switch and unplug the power plug. Failure to
observe these items may result in fire or electrical shock.
CAUTION:
● Clean the copier using a firmly wrung-out cloth dampened with a mild cleansing detergent. Do
not use alcohol, benzene, paint thinner or other inflammable substances. If inflammable
substances come into contact with a high-voltage area inside the copier, this may result in fire or
electrical shock.
●Unplug the power plug from the outlet at least once a year, and clean the area around the base of
the plug's metal pins to ensure all dust is removed. If dust accumulates in this area, it may result
in a fire.
■

Platen glass

Clean the platen glass with a cloth dampened with water
or a mild cleaning agent, then wipe with a dry cloth.
■
Bottom of the RDF (Feeding belt)
Move the feeding belt with your hand as you wipe it with
a cloth dampened with water or a mild cleaning agent,
then wipe with a dry cloth.
MEMO:
●
If the RDF's feeding roller becomes dirtied, your
originals may have black streaks or appear dirty
after feeding them in the the RDF. In this case,
perform Feeder Cleaning. Also perform Feeder
Cleaning if feeding problems are frequently
occurring in the RDF. (See "Additional Functions /
Feeder Cleaning," on p. 4-21.)
7-5