Grip the handle of the paper drawer. Gently
4
slide the Side Paper Deck back into the copier
until it clicks into place in the closed position.
CAUTION:
● When closing the Side Paper Deck, be careful not to
get your fingers caught in it, as this may result in
personal injury.
Adjusting a Paper Drawer to Hold a Different Paper Size
If you want to load a new paper size in a paper drawer, follow the procedure described below to
adjust the paper drawer guides.
You can adjust the paper drawers to hold the following standard paper sizes: 11" x 17", LGL,
LTR, LTRR, STMT, and STMTR.
NOTICE:
●
The paper sizes loaded in the lowest drawer can be changed as necessary to meet your
copying needs.
●
The sizes loaded in other drawers must be changed by your service representative. For more
details, contact your service representative.
Squeeze the lever on the length guide as shown
1
in the figure. Without releasing the lever, slide
the length guide to align it with the mark for the
desired paper size.
When loading 11" x 17" -size copy paper, slide
the length guide all the way to the left, and drop
it downward.
Length guide
5-7