Sadf Auto Feed; Drawer Eligibility For Aps/Ads - Canon NP6551 Operator's Manual

Select the [ON] or [OFF] key, then press the
[DONE] key.
MEMO:
●
With the High Speed 1→2-sided mode, you can skip
the page count and shorten the copying time by
doing the following:
1. Copying alternate pages of the original from the
last page and counting the number of sheets at
the same time.
2. Matching the number of sheets in the original,
copy the remaining pages so that the first page of
the original comes first.
(Example) If the original is 5 pages.
After copying the 5th page, then the 3rd page,
then the 1st page, copy the 2nd page on the back
of the 1st page, the 4th page on the back of the
3rd page, and nothing on the back of the 5th
page.
●
If you are copying an odd number of originals with
copy paper that has right and left side differences,
to prevent copies from being output with the right
and left sides reversed, you should set the High
Speed 1→2-sided mode to OFF.
●
The default setting is "High Speed 1→2-sided: ON."
■

SADF Auto Feed

With the default setting, when you feed an original into
the SADF tray, it is automatically pulled in and copied.
ON: Copying starts automatically.
OFF: Copying starts when you press the
Select the [ON] or [OFF] key, then press the
[DONE] key.
MEMO: ●
The default setting "SADF AUTO FEED : ON".
■

Drawer Eligibility for APS/ADS

With the default setting, all paper drawers and the Side
Paper Deck are set to ON for Auto Paper Selection(APS)
and Auto Drawer Selection(ADS). With APS, the copier
automatically selects the appropriate paper size(paper
drawer or the Side Paper Deck) for the size of the original
and the set copy ratio. With ADS, if a paper drawer or the
Side Paper Deck runs out of paper during a continuous
copy job, the copier automatically selects another paper
drawer or the Side Paper Deck with the same paper size
and begins feeding paper from it.
Using Drawer Eligibility for APS/ADS, you can set which
drawers or the Side Paper Deck you would like to have
eligible for APS and ADS.
ON: A drawer is eligible for APS/ADS.
OFF: A drawer is not eligible for APS/ADS and must be
manually selected.
4-8
key.
Start