Canon NP6551 Operator's Manual page 129

Select the size of the transparencies and then,
4
press the [OK] key.
MEMO:
●
In the Transparency Interleaving mode, the
transparencies are fed from the stack bypass and
the copy paper is fed from the paper drawer or the
Side Paper Deck. Make sure that one of the paper
drawers is loaded with paper that is the same size
as the transparencies.
●
If the message to the right appears in the touch
panel display, adjust the slide guides and select the
size of the transparencies again.
Select [PRINTED] or [BLANK], then press the
5
[OK] key.
MEMO:
●
When copying interleaf sheets, those sheets are
counted in the total number of copies.
After you have finished making the settings,
press the [DONE] key.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO: ●
Interleaf sheets are output before transparenies.
●
To cancel the settings, press the
(The copier returns to the Standard mode.)
3-32
Reset
key.