Canon NP6551 Operator's Manual page 88

Select the copy paper size.
2
Press the [ZOOM] key.
3
Press the [AUTO ZOOM] key and then, press
4
the [DONE] key.
The mode is set and the [ZOOM] key is
highlighted.
■ If you placed your original on the platen glass
When you close the RDF, the selected copy ratio
appears in the touch panel display.
■ If you placed your original(s) in the RDF
After you press the
selected copy ratio appears in the touch panel
display.
■ If you placed your original in the SADF tray of
the RDF
After you have placed the original in the tray and
it has been pulled into the copier, the selected
copy ratio appears in the touch panel display.
MEMO:
●
When the copier calculates a copy ratio at less than
49%, it sets the copy ratio to 49%. When the copier
calculates a copy ratio at more than 204%, the copy
ratio is automatically set to 204%.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO:
●
To return to direct copying (100%), press the
[DIRECT] key.
●
To cancel the setting, press the [ZOOM] key and
then the [C] key.
●
You can also return to direct copying by pressing
Reset
the
mode.)
key to begin copying, the
Start
key. (The copier returns to the Standard
2-49