Using The Rdf - Canon NP6551 Operator's Manual

Using the RDF

Acceptable Originals
■
Original weight:
Original tray: LTR, vertically placed: 15-lb bond to 110-lb index (52 g/m
■
Original size: STMT to 11" x 17" (STMT-size cannot be placed horizontally.)
■
Original tray capacity: LGL or 11" x 17": 50 sheets (20-lb bond or 80 g/m
NOTICE: ●Do not place the following types of originals in the RDF:
• Originals with tears or large binding holes
• Severely curled originals or originals with sharp folds
• Clipped or stapled originals
• Carbon-backed paper or other originals which might not feed smoothly
• Transparencies and other highly transparent originals
●
Check the condition of originals which have been fed through the RDF many times. When
copying the same original repeatedly using the RDF, do not allow the original to circulate
more than about 50 times in a single job. Originals which have been fed through the RDF
many times can become folded or wrinkled and might not feed smoothly.
Adjust the slide guides to fit the size of the
1
originals.
Neatly stack originals face up in the original tray.
2
NOTICE: ●
Flip open the auxiliary tray when feeding LTRR,
LGL, or 11" x 17"-size originals.
LGL, 11" x 17", LTRR and STMT: 15 to 32-lb bond (52 g/m
STMT, LTR or LTRR: 100 sheets (20-lb bond or 80 g/m
2 2
to 200 g/m )
2 to 128 g/m 2 )
2
)
2
)
2-7