Installation Precautions - Canon NP6551 Operator's Manual

Installation Precautions

Observe the following precautions when
selecting a site to install the copier:
• Avoid locations which are subject to low
temperatures and low humidity, or high
temperatures and high humidity.
For example, avoid installing the copier near water faucets,
hot water heaters, humidifiers, air conditioners, heaters and
stoves.
• Do not install the copier in front of a window
which receives direct sunlight.
(If unavoidable, shade the copier using curtains.)
• Avoid locations where a considerable amount
of dust accumulates.
• Avoid locations where ammonia gas is
emitted.
• Avoid locations near volatile flammables, such
as alcohol or paint thinner.
• Avoid locations which are subject to vibration.
Avoid locations with an unstable floor or foundation.
•Avoid rapid changes in temperature.
If the room in which the copier is located is rapidly heated
from a low temperature, condensation may form inside the
copier. This can adversely affect copy quality or result in an
inability to obtain copy images.
• Do not install the copier near computers or
other precision electronic equipment.
Electrical interference and vibrations generated by the copier
during copying can adversely affect the operation of such
equipment.
• Do not install the copier near televisions,
radios or other similar electronic equipment.
The copier might interfere with sound and picture signal
reception, etc. Plug the copier into a dedicated power outlet
and maintain as much space as possible between the copier
and other electronic equipment.
1-10