Canon NP6551 Operator's Manual page 112

■ Insertion Sheet
This mode enables you to automatically add up to 20 printed or blank insertion sheets of a
different type of copy stock between the pages of copy sets. It is very useful when you
want to divide your copy sets into different sections. When using this mode together with
the 1 → 2-sided copy mode you can perform the "Chapterization" of your copy sets.
"Chapterization," means that you can have copy stock inserted as a chapter heading
sheet to identify a chapter within your copy set. The new chapter then automatically
begins on the front of a new page; the back of the previous page is left blank or printed on
if necessary. (See p. 3-14.)
Originals
R E P O R T
MEMO:
● You cannot use the following modes with the Cover/Sheet Insertion mode: Book → 1-sided,
Book → 2-sided, Image Combination, Image Separation, Sheet Overlay, Book Overlay,
Transparency Interleaving, and Different Size Original.
●
Printed cover and insertion sheets are counted as copies.
●
When the Cover/Sheet Insertion mode is set, Auto Drawer Switching is automatically set to
"OFF".
Place your originals in the RDF. (See p. 2-18.)
Press the [SPECIAL FEATURES] key, then
1
press the [COVER/SHEET INSERTION] key.
Printed insertion sheets selected
in the Cover/Sheet Insertion mode
Copies
R E P O R T
3-15