Placing Originals In The Rdf - Canon NP6551 Operator's Manual

Placing Originals in the RDF

Place a stack of originals in the RDF, and they are automatically fed to the platen glass for
copying.
NOTICE:
●
Do not place the following types of originals in the RDF:
• Originals with tears or large binding holes
• Severely curled originals or originals with sharp folds
• Clipped or stapled originals
• Carbon-backed paper or other originals which might not feed smoothly
• Transparencies and other highly transparent originals
●
Check the condition or originals which have been fed through the RDF many times.
When copying the same original repeatedly using the RDF, do not allow the original to
circulate more than about 50 times in a single job.
Originals which have been fed through the RDF many times can become folded or wrinkled
and might not feed smoothly.
Adjust the slide guides to fit the size of your
1
originals.
Neatly stack your originals face up in the original
2
tray.
The capacity of the original tray is as follows:
• LGL or 11" x 17"-size originals
• STMT, LTR or LTRR-size originals 100 sheets
NOTICE:
●
After copying begins, do not add or remove
originals.
●
You cannot place STMT-size originals
horizontally.
●
When enlarging from LTR to 11" x 17"-size,
place your originals horizontally.
●
Before placing the following types of originals in
the RDF, flip open the auxiliary tray:
• LTRR, LGL or 11" x 17"-size originals
(horizontal placement)
• Different-size originals (see p. 3-39).
MEMO: ●
You can feed different-size originals together in one
group in the RDF, if the leading edge of each page
is the same length and the originals are the same
thickness. (See p. 3-39.)
●
If you place a stack of LTR-size originals in the RDF
for 1→1-sided copy with the auxiliary tray closed,
the originals will be copied with the Accelerated
mode. (See "Accelerated Mode," on p. 1-26.)
●
If more than one-sided original is placed in the RDF,
the number of originals will be automatically counted
before copying begins. The Auto Count function can
be cancelled if you specify whether you loaded an
odd or even number of originals into the RDF.
• When you use the Auto Count function, the
originals are fed through the RDF and
automatically counted before copying.
• If you specify the number of originals (EVEN
NUMBER or ODD NUMBER), automatic counting
is not performed. Cancelling automatic counting
saves time and also reduces the wear and tear on
originals.
2-18
50 sheets