Canon NP6551 Operator's Manual page 131

Press the [SPECIAL FEATURES] key, then
2
press the [TWO-PAGE SEPERATION] key.
Select how you would like your copies output,
3
then press the [OK] key.
■ To have copies output in page order starting
with the first facing pages of the original,
either select [YES] or instead, select [NO] and
make your copies starting with the last pages
of the original.
MEMO:
●
The follow restrictions apply to face down output
copying:
• You must select the paper size manually;
Auto Paper Selection cannot be selected.
• You must place your original(s) on the platen glass;
originals cannot be placed in the feeder.
• You cannot make LGL or 11" x 17"-size copies.
●
If you staple copies that have been output face
down, then the staple position will be the opposite of
the usual position. It is recommended that you do
not perform stapling when copies have been output
face down.
After you have finished making the settings,
press the [DONE] key.
Proceed to copy in the usual manner.
(See "Making Copies," on p. 2-4.)
MEMO: ●
To cancel the settings, press the
(The copier returns to the Standard mode.)
3-34
Reset
key.