Zoom Fine Adjustment - Canon NP6551 Operator's Manual

Select the mode to be changed.
3
Follow the procedures described below to make
changes to various functions.
Press the [DONE] key.
4
MEMO: ●
When you are finished setting Additional Functions,
press the [DONE] key again.
■

Zoom Fine Adjustment

If there is a slight difference in size between the original
and output copy images when the copy ratio is set to
100% (direct), use this function to correct the error.
Adjustments can be made independently in the X and Y
directions. You can perform adjustments to ±1%, in 0.2%
increments.
Select ZOOM FINE ADJUSTMENT.
Press the [
1
adjustments. Then, press the [OK] key.
To increase the copy ratio, press the [
To decrease the copy ratio, press the [
MEMO: ●
Confirm fine adjustments by making copies and
comparing them with the original.
4-20
] or [ ] key to make fine
Y
] key.
] key.
Copy
X