Accelerated Mode - Canon NP6551 Operator's Manual

Press the key and proceed to copy.
4
Start
If the Job Duration Display is set to ON in
Additional Functions and the appropriate modes
are set, the screen for entering the number of
originals will be displayed. When the number of
originals is entered with the Number keys (
), the remaining time necessary to complete
0
the copy job is displayed.
CAUTION:
● Do not touch the Sorter bins while making copies as
this may result in personal injury.
MEMO: ●
After copying begins, you cannot change the copy
quantity, paper size, copy ratio or other copy
settings.
●
Job Duration Display can be set to ON or OFF in
Additional Functions. (See "Job Duration Display,"
on p. 4-10.)
■

Accelerated Mode

In the Accelerated mode the scanning unit is fixed and the original is scanned as it is
moved through the RDF.
The Accelerated mode speeds up the copy speed of LTR-size originals from 50 cpm to
60 cpm and is automatically set under the following conditions:
• Original size: LTR
• 1 → 1-sided copying
• Number of sets of copies: 1
• Copy ratio: 70% to 115%
• Paper feeding: from any drawer other than the lowest one, from the Side Paper Deck, or from the stack
bypass
• Auxiliary tray closed
MEMO:
●
When the Accelerated mode is in effect, originals will feed through the right side of the RDF.
●
Make sure to stack your originals neatly, otherwise, no copy job may be done in the Accelerated
mode.
■
Stopping before copying is completed
If you want to stop the copier before copying is
completed, press the
MEMO:
●
Several sheets might be output even after the Stop
key has been pressed.
●
Remove any paper remaining in the duplexing unit
by referring to the section on "Clearing Paper
Jams", on pp. 6-2 to 6-32.
If your originals have black streaks or appear
dirty after feeding them through the RDF, the
feeder roller might be dirtied with pencil lead.
Follow the procedure described on p. 4-21 to
perform feeder cleaning.
Stop
key.
Clear
–
1
Display Contrast
Stop
Clear
Stop
Start
Energy Saver
2-9