Canon NP6551 Operator's Manual page 168

Open a package of copy paper, and remove the
3
paper stack. (Make sure that the seam on the
center of the package is face up.)
NOTICE: ●
Rewrap any remaining paper in its original
package, and store it in a dry place away from
direct sunlight.
●
Do not copy on the following types of copy stock;
doing so may cause a paper jam.
• Severely curled or wrinkled paper
• Transparencies for digital full-color copiers
• Paper which has been copied on using a digital
full-color copier (do not copy on the reverse side
either)
• Paper which has been printed on using a
thermal transfer printer (do not copy on the
reverse side either)
MEMO: ●
Drawer 3, 4 each holds up to approximately 550
sheets of copy paper (20-lb bond).
●
For high-quality copies, use paper recommended by
Canon.
Place the paper stack in the paper drawer.
4
Even out the edges of the paper stack. Load the
paper stack against the right wall of the paper
drawer or paper deck.
REQUEST:
● Do not place any objects in the empty space of
the drawer, as this may cause damage.
NOTICE: ●
If the copy paper is curled, curl it down before
placing it in the paper drawer.
●
Make sure that the height of the paper stack does
not exceed the limit mark (
paper drawer.
●
Make sure that the paper size setting in the paper
drawer matches the size of the paper to be
loaded. (See "Adjusting a Paper Drawer to Hold a
Different Paper Size," on p. 5-7.)
Grip the handle on the front of the paper drawer.
5
Gently slide the paper drawer back into the
copier until it clicks into place in the closed
position.
CAUTION:
● When closing the paper drawer, be careful not to
get your fingers caught in it, as this may result in
personal injury.
) at the back of the
5-5