Using Preset Copy Ratios
(Enlarge/Reduce Originals from One Standard Paper Size to Another)
The NP6551 is equipped with the preset copy ratios shown below. These ratios were
chosen so that standard-size originals could easily be converted from one standard size to
another.
[ENLARGE]
LGL → 11"x17"(121%)
●
LTR → 11"x17"(129%)
●
STMT → 11"x17"(200%)
●
NOTICE:
●
Place your originals horizontally in following
cases:
• When enlarging LTR-size originals to LGL or
• When enlarging STMT-size originals to 11"x17"-
●
When reducing 11" x 17" or LGL-size originals to
LTR-size, select LTRR-size copy paper.
Place your originals.
■ For instructions on how to place an original on
the platen glass, see p. 2-17.
■ For instructions on how to place originals in
the RDF, see p. 2-18.
■ For instructions on how to place an original in
the SADF tray of the RDF, see p. 2-19.
Press [ENLARGE] or [REDUCE] to have the
1
preset copy ratios appear in the touch panel
display.
To make larger copies on a standard paper size,
press [ENLARGE]. To make smaller copies on a
standard paper size, press [REDUCE].
2-40
11"x17"-size
size
[REDUCE]
LGL → LTR (78%)
●
11"x17" → LGL/11"x15" → LTR (73%)
●
11"x17" → LTR (64%)
●
11"x17" → STMT (50%)
●
V
C
B
A