Cleaning the Inside of the Main Unit
If streaks appear on printed output, or random parts of the printed image are
missing, the inside of the main unit may be dirty. In this case, clean the inside of the
main unit, as described below.
NOTE
It takes three minutes and 10 seconds to clean the inside of the main unit.
1
4
2
Automatic Feeder Cleaning
If your originals have black streaks or appear dirty after scanning them through the
feeder, clean the rollers of the feeder.
NOTE
•
[Feeder Cleaning] appears only if the optional Feeder (DADF-L1) (standard-equipped for
the Color imageRUNNER C3380i/C2880i) is attached.
•
It takes approximately 25 seconds to clean the feeder.
1
2
4-74
Adjusting the Machine
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Press
[Cleaning inside Main Unit].
Press [Start].
When cleaning is complete, try printing again.
(Additional Functions) ➞ [Adjustment/Cleaning] ➞
Press
[Feeder Cleaning].
Place 10 sheets of blank paper into the feeder ➞ press [Start].
Make sure that you fan the sheets of paper well.
Use LTR paper (16 to 20 lb bond (60 to 80 g/m
When cleaning is complete, try scanning again.
NOTE
To cancel feeder cleaning while it is in progress, press [Cancel].
2
)).