Loading Paper In A Paper Drawer 1, 2; Loading Paper In A Paper Drawer 1,2 - Canon NP6551 Operator's Manual

Loading Paper in a Paper Drawer 1, 2

NOTICE:
●
The paper sizes for the paper drawers can be set for LTR-size paper. The sizes must be
changed by your service representative. For more details, contact your service
representative.
Grip the handle on the front of the paper drawer
1
in which you want to load paper. Pull out the
paper drawer until it stops.
Open a package of copy paper, and remove the
2
paper stack. (Make sure that the seam on the
center of the package is face up.)
NOTICE:
●
Rewrap any remaining paper in its original
package, and store it in a dry place away from
direct sunlight.
●
Do not copy on the following types of copy stock;
doing so may cause a paper jam.
• Severely curled or wrinkled paper
• Transparencies for digital full-color copiers
• Paper which has been copied on using a digital
full-color copier (do not copy on the reverse side
either)
• Paper which has been printed on using a
thermal transfer printer (do not copy on the
reverse side either)
MEMO: ●
Drawer 1, 2 each holds up to approximately 1,500
sheets of copy paper (20-lb bond).
●
For high-quality copies, use paper recommended by
Canon.
Place the paper stack in the paper drawer.
3
Even out the edges of the paper stack. Load the
paper stack against the right wall of the paper
drawer or paper deck.
REQUEST:
● Do not place any objects in the empty space of
the drawer, as this may cause damage.
NOTICE:
●
If the copy paper is curled, curl it down before
placing it in the paper drawer.
●
Make sure that the height of the paper stack does
not exceed the limit mark (
paper drawer.
●
Make sure that the paper size setting in the paper
drawer matches the size of the paper to be
loaded.
) at the back of the
5-3