Canon NP6551 Operator's Manual page 128

Place your originals.
■ For instructions on how to place an original on
the platen glass, see p. 2-17.
■ For instructions on how to place originals in
the RDF, see p. 2-18.
■ For instructions on how to place an original in
the SADF tray of the RDF, see p. 2-19.
Press the [ONE-SIDED] key.
1
Press the [SPECIAL FEATURES] key, then
2
press the [TRANSP. INTERLVNG] key.
Place the transparencies in the stack bypass.
3
MEMO:
●
Adjust the slide guides in the stack bypass to fit the
size of the transparencies.
●
You can place a stack of transparencies of up to
(5 mm) high in the stack bypass.
1
⁄ "
4
3-31