Number Of Copies/Wait Time Status Display; Clean The Original Scanning Area Prompt - Canon CLC5151 Reference Manual

Number of Copies/Wait Time Status Display

If the Number of Copies/Wait Time Status Display mode is set to 'On', the number of copies
specified and the approximate time before the current job completes is displayed in the Job/
Print Status Display Area.
NOTE
• The accuracy of the approximate times displayed in the Job/Print Status Display Area may vary,
depending on the status of the machine.
• The approximate time is not displayed when the wait time is less than one minute.
1
4
2

Clean the Original Scanning Area Prompt

You can use the Cleaning Display for the Original Scanning Area mode to prompt you to clean
the scanning area when the machine detects streaks or stains. If the feeder is not clean, the
machine will scan and print dust and grime on the output. The Clean the Original Scanning
Area Prompt appears when originals are placed in the feeder. For instructions on cleaning the
feeder's scanning area, see "Manual Feeder Cleaning," on p. 7-43.
NOTE
[Cleaning Display for the Original Scanning Area] is displayed only if the optional Color Image
Reader-F1 is attached.
1
2
4-58
Specifying Common Settings
Press [Common Settings]
Status Display].
Select [On] or [Off]
Press [Common Settings]
Scanning Area].
Select [On] or [Off]
[Number of Copies/Job Duration
press [OK].
[Cleaning Display for the Original
press [OK].