Binding Erase - Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual

Binding Erase

IMPORTANT
•
The Binding Erase mode cannot be used with the Document Size Select (11x17+, Other
Size, and Long Strip Original) or 2-Page Separation mode.
•
Do not place originals with binding holes into the feeder, as this may damage the
originals.
•
If you are using the Binding Erase mode, the borders you do not select are also erased
by 1/8" (4 mm).
1
Place your originals and specify the destination ➞ press the
Scan Settings drop-down list ➞ [Option] ➞ [Special Features]
➞ [Frame Erase].
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."
2
Press [Binding Erase] ➞ select the border where the binding
holes are located.
The border is where the binding holes are located on the original, if you visualize
the original as being face up.
3
Press [-] or [+] to set the frame erase width ➞ press [OK].
4-9
Frame Erase
4