Installing A Line Card In An Ex8200 Switch; Figure 57: Unpacking A Line Card Used In An Ex8200 Switch - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches
Related
Documentation

Installing a Line Card in an EX8200 Switch

154
Ensure that you know how to handle and store the line card (see "Handling and Storing
Line Cards in EX8200 Switches" on page 227).
To unpack a line card (see Figure 57 on page 154):
Move the shipping carton to a staging area as close to the installation site as possible.
1.
Position the carton so that the arrows are pointing up.
2.
Open the top flaps on the shipping carton.
3.
Pull out the packing material, which holds the line card in place.
4.
Remove the line card from the antistatic bag.
5.
Save the shipping carton and packing materials in case you need to move or ship the
6.
line card later.

Figure 57: Unpacking a Line Card Used in an EX8200 Switch

Packing a Line Card Used in an EX8200 Switch on page 263
Installing a Line Card in an EX8200 Switch on page 154
8-port SFP+ Line Card in an EX8200 Switch on page 32
40-port SFP+ Line Card in an EX8200 Switch on page 33
48-port SFP Line Card in an EX8200 Switch on page 35
48-port RJ-45 Line Card in an EX8200 Switch on page 36
EX8200 switches have field-replaceable unit (FRU) line cards that can be installed in
the line card slots on the front of the switch chassis. The line cards are hot-insertable
and hot-removable: You can remove and replace them without powering off the switch
or disrupting switch functions.
Before you begin installing a line card in the switch:
Copyright © 2010, Juniper Networks, Inc.