EX8208 Switch Configurations
Table 1: EX8208 Switch Hardware Configurations
Switch Configuration
Base configuration (AC with 2000 W AC power supplies)
Base configuration (AC with 3000 W AC power supplies)
Redundant configuration (AC with 2000 W AC power supplies)
Redundant configuration (DC)
Copyright © 2010, Juniper Networks, Inc.
Table 1 on page 7 lists the seven sample hardware configurations for an EX8208
switch—base (AC), redundant (AC and DC versions), and fully loaded chassis (AC and
DC versions)—and the components included in each configuration.
The switch is shipped in only four of these seven configurations: base (AC with 2000 W
AC power supplies), base (AC with 3000 W AC power supplies), redundant (AC with
2000 W AC power supplies), and redundant (DC).
Chapter 1: EX8208 Switch Overview
Configuration Components
Chassis with backplane
One fan tray
One Switch Fabric and Routing Engine (SRE) module
One Switch Fabric (SF) module
Two 2000 W AC power supplies
Two power cords
Eight line card cover panels
Four power supply cover panels
Chassis with backplane
One fan tray
One Switch Fabric and Routing Engine (SRE) module
One Switch Fabric (SF) module
Two 3000 W AC power supplies
Two power cords
Eight line card cover panels
Four power supply cover panels
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W AC power supplies
Six power cords
Eight line card cover panels
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Four 2000 W DC power supplies
16 DC power cable lugs
Eight line card cover panels
7