Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Ensure that you have the following parts and tools available to remove the power cord
tray:
A Phillips (+) screwdriver, number 1, 2, or 3, depending on the size of your rack mounting
screws
To remove the power cord tray:
Use the appropriate Phillips (+) screwdriver to remove the four mounting screws that
1.
hold the power cord tray in the rack.
Remove the power cord tray and store it in the original switch accessory box for later
2.
use.
Installing the Power Cord Tray in a Rack or Cabinet for an EX8200 Switch on page 129
Chapter 13: Removing Switch Components
223