Ex8208 Switch Hardware And Cli Terminology Mapping; Figure 4: Slot Numbering For Power Supply Slots On An Ex8208 Switch Chassis; Table 7: Cli Equivalents Of Terms Used In Documentation For Ex8208 - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches
Related
Documentation

EX8208 Switch Hardware and CLI Terminology Mapping

Table 7: CLI Equivalents of Terms Used in Documentation for EX8208 Switches
Hardware
Item (CLI) Description (CLI)
Chassis EX8208
Backplane EX8208-BP-S
16
Figure 4: Slot Numbering for Power Supply Slots on an EX8208 Switch
Chassis Front
NOTE: Power supplies can be installed in any slot. You do not have to install
them in serial order. See "Installing an AC Power Supply in an EX8200 Switch"
on page 144 and "Installing a DC Power Supply in an EX8200 Switch" on
page 146.
8-port SFP+ Line Card in an EX8200 Switch on page 32
40-port SFP+ Line Card in an EX8200 Switch on page 33
48-port SFP Line Card in an EX8200 Switch on page 35
48-port RJ-45 Line Card in an EX8200 Switch on page 36
EX8208 Switch Hardware Overview on page 3
This topic describes the hardware terms used in EX8208 switch documentation and the
corresponding terms used in the Junos OS command line interface (CLI). See Table 7 on
page 16.
Value (CLI)
–
–
Item In Documentation Additional Information
Switch chassis "Chassis Physical
Specifications of an
EX8208 Switch" on
page 9
Backplane "Backplane in an EX8208
Switch" on page 56
Copyright © 2010, Juniper Networks, Inc.