Rack-Mounting And Cabinet-Mounting Warnings For Ex Series Switches - Juniper EX8208 Complete Hardware Manual

Juniper networks switch user manual
Hide thumbs Also See for EX8208:
Table of Contents

Advertisement

Complete Hardware Guide for EX8208 Ethernet Switches
Related
Documentation

Rack-Mounting and Cabinet-Mounting Warnings for EX Series Switches

284
Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.
General Safety Guidelines and Warnings for EX Series Switches on page 267
Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 275
Installation Instructions Warning for EX Series Switches on page 281
Grounded Equipment Warning for EX Series Switches on page 288
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
Ensure that the rack or cabinet in which the device is installed is evenly and securely
supported. Uneven mechanical loading could lead to a hazardous condition.
WARNING: To prevent bodily injury when mounting or servicing the device
in a rack, take the following precautions to ensure that the system remains
stable. The following directives help maintain your safety:
The device must be installed in a rack that is secured to the building
structure.
The device should be mounted at the bottom of the rack if it is the only unit
in the rack.
When mounting the device on a partially filled rack, load the rack from the
bottom to the top with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing equipment, install the stabilizers
before mounting or servicing the device in the rack.
WARNING: Waarschuwing Om lichamelijk letsel te voorkomen wanneer u
dit toestel in een rek monteert of het daar een servicebeurt geeft, moet u
speciale voorzorgsmaatregelen nemen om ervoor te zorgen dat het toestel
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents