Switches; Compliance Statements For Emc Requirements For Ex Series Switches - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches
Related
Documentation
Battery Compliance Statement for Environmental Requirements for EX Series Switches
Related
Documentation

Compliance Statements for EMC Requirements for EX Series Switches

314
EN 300386
EN 61000-3-2 Power Line Harmonics
EN 61000-3-3 Voltage Fluctuations and Flicker
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Low Frequency Common Immunity
EN 61000-4-11 Voltage Dips and Sags
Compliance Statements for EMC Requirements for EX Series Switches on page 314
Compliance Statements for Acoustic Noise for EX Series Switches on page 317
EX8200 Ethernet switches contain lithium batteries.
Batteries used in these switches are not based on substances containing mercury, lead,
or cadmium. The batteries used in these switches comply with EU Directives 91/157/EEC,
93/86/EEC, and 98/101/EEC. The product documentation includes instructional
information on the proper method of reclamation and recycling.
Agency Approvals for EX Series Switches on page 313
Compliance Statements for EMC Requirements for EX Series Switches on page 314
This topic applies to hardware devices in the EX Series product family, which includes
switches and the XRE200 External Routing Engine.
This topic describes the EMC requirements for these hardware devices for:
Canada on page 315
European Community on page 315
Japan on page 315
United States on page 316
FCC Part 15 Statement on page 316
Non-Regulatory Environmental Standards on page 316
Copyright © 2010, Juniper Networks, Inc.