Juniper EX8208 Complete Hardware Manual page 34

Complete Hardware Guide for EX8208 Ethernet Switches
Table 1: EX8208 Switch Hardware Configurations (continued)
Switch Configuration
Fully loaded chassis configuration (AC with 2000 W AC power
supplies)
Fully loaded chassis configuration (AC with 3000 W AC power
supplies)
Fully loaded chassis configuration (DC)
Related
Documentation
8
NOTE: You can install up to eight line cards (any combination of line cards)
in the switch.
NOTE: Line cards are not part of the base or redundant configuration. You
must order them separately.
NOTE: If you want to purchase additional power supplies (AC or DC) for your
switch configuration, you must order them separately.
Chassis Physical Specifications of an EX8208 Switch on page 9
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 26
Switch Fabric (SF) Module in an EX8208 Switch on page 30
8-port SFP+ Line Card in an EX8200 Switch on page 32
40-port SFP+ Line Card in an EX8200 Switch on page 33
Configuration Components
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W AC power supplies
Six power cords
Eight line cards
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 3000 W AC power supplies
Six power cords
Eight line cards
Chassis with backplane
One fan tray
Two SRE modules
One SF module
Six 2000 W DC power supplies
24 DC power cable lugs
Eight line cards
Copyright © 2010, Juniper Networks, Inc.