Chassis Physical Specifications Of An Ex8208 Switch; Table 2: Physical Specifications Of The Ex8208 Switch Chassis - Juniper EX8208 Complete Hardware Manual

Chassis Physical Specifications of an EX8208 Switch

Table 2: Physical Specifications of the EX8208 Switch Chassis

Description
Chassis height
Chassis width
Chassis depth
Weight
Copyright © 2010, Juniper Networks, Inc.
48-port SFP Line Card in an EX8200 Switch on page 35
48-port RJ-45 Line Card in an EX8200 Switch on page 36
AC Power Supply in an EX8200 Switch on page 41
Cooling System and Airflow in an EX8208 Switch on page 54
Backplane in an EX8208 Switch on page 56
The EX8208 switch chassis is a rigid sheet-metal structure that houses the other switch
components. Table 2 on page 9 summarizes the physical specifications of the EX8208
switch chassis. See Figure 2 on page 10.
Value
24.25 in. (61.6 cm)
17.25 in. (43.82 cm)
The outer edges of the front-mounting brackets extend the width to 19 in. (48.3 cm).
20 in. (50.8 cm)
The depth from the front-mounting bracket to chassis rear is 20.69 in. (52.6 cm).
Chassis with backplane: 89 lb (41 kg)
Base configuration: 149 lb (68 kg)
Redundant configuration: 187 lb (85 kg)
Fully loaded chassis: 284 lb (129 kg)
See "EX8208 Switch Configurations" on page 7.
NOTE: The fully loaded chassis weight includes the heaviest line cards in all eight
slots. If your switch configuration has lighter line cards, the fully loaded chassis weight
will be in the 268–284 lb (122–129 kg) range.
Chapter 1: EX8208 Switch Overview
9