Cable Requirements; Chapter 6 Cable Requirements; Cables Connecting The Ex8200 Switch To Management Devices; Table 42: Cable Specifications For Switch-To-Management-Device - Juniper EX8208 Complete Hardware Manual

CHAPTER 6

Cable Requirements

Cables Connecting the EX8200 Switch to Management Devices

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Cables Connecting the EX8200 Switch to Management Devices on page 99
Understanding EX8200 Switch Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion on page 100
Table 42 on page 99 lists the specifications for the cables that connect the Switch Fabric
and Routing Engine (SRE) module (in an EX8208 switch) or the Routing Engine (RE)
module (in an EX8216 switch) to a management device.

Table 42: Cable Specifications for Switch-to-Management-Device

Connections

Port on SRE
Module or RE Cable
Module Specification
Console (CON) RS-232 (EIA-232)
port (9600 baud) serial cable
Management Category 5 cable
(MGMT) Ethernet or equivalent
port suitable for
(10/100/1000) 1000Base-T
operation
Connecting an EX Series Switch to a Management Console on page 178
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 183
Cable/Wire Maximum
Supplied Length
One 6-foot 6 feet
(1.83-meter) length (1.83 meters)
with RJ-45/DB-9
connectors
One 15-foot 328 feet
(4.57-meter) length (100 meters)
with RJ-45
connectors
Switch
Receptacle
RJ-45
RJ-45
autosensing
99