Installing The Power Cord Tray In A Rack Or Cabinet For An Ex8200 Switch; Figure 42: Adjustable Mounting Brackets Installed In A Four-Post Rack - Juniper EX8208 Complete Hardware Manual
Juniper networks switch user manual
Hide thumbs
Also See for EX8208:
- Hardware manual (404 pages) ,
- Instruction (3 pages) ,
- Installation & removal instructions (3 pages)
Table of Contents
Advertisement
Related
Documentation
Installing the Power Cord Tray in a Rack or Cabinet for an EX8200 Switch
Copyright © 2010, Juniper Networks, Inc.
Figure 42: Adjustable Mounting Brackets Installed in a Four-Post Rack
(EX8208 Switch)
Figure 43: Adjustable Mounting Brackets Installed in a Four-Post Rack
(EX8216 Switch)
Mounting an EX8208 Switch on a Rack or Cabinet Using a Mechanical Lift on page 135
Mounting an EX8208 Switch on a Rack or Cabinet Without Using a Mechanical Lift on
page 137
Mounting an EX8216 Switch on a Rack or Cabinet
The power cord tray is supplied with all EX8200 switches. The power cord tray is optional
for four-post rack or cabinet installation but mandatory for a two-post rack or cabinet
installation. (The remainder of this topic uses "rack" to mean "rack or cabinet.") To mount
Chapter 8: Installing the Switch
129
Advertisement
Table of Contents
Troubleshooting
