Figure 3: Slot Numbering For An Ex8208 Switch - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches
Table 5: Slot Numbering for an EX8208 Switch (continued)
Slot Label
4
5
6
7
14
Figure 3 on page 14 shows the slot numbering, which is on the front left of the chassis.

Figure 3: Slot Numbering for an EX8208 Switch

Slots 0 through 7 accept one of the line cards available. See "Installing a Line Card in an
EX8200 Switch" on page 154.
Slots SRE0 and SRE1 accept only the SRE module. You can install one SRE module or
two SRE modules based on the configuration of your switch. See "Switch Fabric and
Routing Engine (SRE) Module in an EX8208 Switch" on page 26.
Components Accepted in Slot
Line card
Line card
Line card
Line card
Copyright © 2010, Juniper Networks, Inc.