Taking The Sf Module Offline In An Ex8208 Switch; Figure 85: Removing An Sre Module From An Ex8208 Switch - Juniper EX8208 Complete Hardware Manual

Complete Hardware Guide for EX8208 Ethernet Switches
Related
Documentation

Taking the SF Module Offline in an EX8208 Switch

Related
Documentation
214

Figure 85: Removing an SRE Module from an EX8208 Switch

Installing an SRE Module in an EX8208 Switch on page 149
Switch Fabric and Routing Engine (SRE) Module in an EX8208 Switch on page 26
The SF module provides switching functionality for an EX8208 switch. Your switch can
have either zero SF modules or one SF module.
NOTE: If you take the SF module offline in a switch configuration having only
one Switch Fabric and Routing Engine (SRE) module, throughput will be low.
To take the SF module offline:
Take the SF module offline:
1.
user@switch> request chassis cb offline slot 2
For an SF module, the control board slot number is always
(Optional) Confirm that the SF module is offline:
2.
user@switch> show chassis environment cb slot-number
The state field in the command output shows that the SF module is offline. It is now
safe to remove or replace the SF module.
Installing an SF Module in an EX8208 Switch on page 151
.
2
Copyright © 2010, Juniper Networks, Inc.