Juniper EX8208 Complete Hardware Manual page 44

Complete Hardware Guide for EX8208 Ethernet Switches
Table 7: CLI Equivalents of Terms Used in Documentation for EX8208 Switches (continued)
Hardware
Item (CLI) Description (CLI)
PSU (n) One of the following:
EX8200-AC2K
EX8200-AC3K
EX8200-DC2K
Fan tray EX8208-FT
LCD (n) EX8200 LCD
Plane (n) This field indicates:
State of the fabric
plane:
Active
Spare
Check State
Status of the
Packet
Forwarding
Engine (PFE) in
each fabric plane:
Links OK
Error
DPC (n) –
PIC (n) –
Related
Documentation
18
Value (CLI)
n is a value in the range of
0–5. The value corresponds
to the power supply slot
number.
–
Value of n is always 0.
n is a value in the range of
0–11.
n is a value in the range of
0–7.
Value of n is always 0.
EX Series Switches Hardware and CLI Terminology Mapping
EX8208 Switch Hardware Overview on page 3
Item In Documentation Additional Information
AC or DC power supply
Fan tray "Cooling System and
Airflow in an EX8208
Switch" on page 54
LCD panel "LCD Panel in an EX8200
Switch" on page 19
Fabric plane show chassis fabric plane
The switch does not have show chassis fabric map
actual Dense Port
Concentrators
(DPCs)–the line cards are
the DPC equivalents on
the switch.
–
Copyright © 2010, Juniper Networks, Inc.
AC Power Supply in an
EX8200 Switch on
page 41
DC Power Supply in an
EX8200 Switch on
page 49
Understanding Interface
Naming Conventions on
EX Series Switches
Network Port Interface
Names on an EX8200
Virtual Chassis