Figure 46: Installing An Ex8208 Switch In A Two-Post Rack; Figure 51: Installing An Ex8208 Switch In A Two-Post Rack - Juniper EX8208 Complete Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.

Figure 51: Installing an EX8208 Switch in a Two-Post Rack

After you install the mounting screws and securely bolt the chassis to the rack, reinstall
the components in the chassis. See:
Installing an SRE Module in an EX8208 Switch on page 149
Installing an SF Module in an EX8208 Switch on page 151
Installing a Line Card in an EX8200 Switch on page 154
Installing a Fan Tray in an EX8208 Switch on page 148
Installing an AC Power Supply in an EX8200 Switch on page 144
Powering On an EX8200 Switch on page 176
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 188
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 190
Chapter 8: Installing the Switch
141