Taking An Sre Module Offline In A Switch With One Sre Module - Juniper EX8208 Complete Hardware Manual

Juniper networks switch user manual
Hide thumbs Also See for EX8208:
Table of Contents

Advertisement

Complete Hardware Guide for EX8208 Ethernet Switches

Taking an SRE Module Offline in a Switch With One SRE Module

Related
Documentation
212
Determine whether the SRE module is the master or backup using one of these
1.
methods:
Look at the
(master) LED on the SRE module faceplate. If the
MS
steady green, the SRE module is the master. If it is blinking green, the SRE module
is the backup.
Issue the following CLI command:
user@switch> show chassis routing-engine
Routing Engine status:
Slot 0: Current state Master
Election priority Master (default) ...
If the SRE module that you want to remove is the master, make it the backup module:
2.
user@switch> request chassis routing-engine master switch
From the master, halt the other Routing Engine:
3.
user@switch> request system halt other-routing-engine
Wait a minute or two for the Routing Engine to halt before proceeding. If you are using
4.
a console connection, you will see a message when the system is halted. If the Routing
Engine has not yet halted, the following step returns an error.
Take the SRE module offline:
5.
user@switch> request chassis cb offline slot slot-number
where
is either
slot-number
(Optional) Confirm that the SRE module is offline:
6.
user@switch> show chassis environment cb
If the state field in the command output shows that the module is offline, then it is safe
to remove the SRE module.
To take the SRE module offline:
Connect to the console port on the SRE module.
1.
From the console, halt the SRE module:
2.
user@switch> request system halt
The RE module is gracefully halted but not powered off.
When a message appears confirming that the operating system has halted, it is safe to
remove the SRE module. The Routing Engine might take up to 5 minutes to gracefully
halt.
Installing an SRE Module in an EX8208 Switch on page 149
Removing an SRE Module from an EX8208 Switch on page 213
SRE Module LEDs in an EX8208 Switch on page 28
(slot SRE0) or
(slot SRE1).
0
1
Copyright © 2010, Juniper Networks, Inc.
LED is lit
MS

Advertisement

Table of Contents
loading

Table of Contents