Removing Switch Components; Removing An Ac Power Supply From An Ex8200 Switch - Juniper EX8208 Complete Hardware Manual

CHAPTER 13

Removing Switch Components

Removing an AC Power Supply from an EX8200 Switch

Copyright © 2010, Juniper Networks, Inc.
Removing an AC Power Supply from an EX8200 Switch on page 205
Removing a DC Power Supply from an EX8200 Switch on page 207
Removing a Fan Tray from an EX8208 Switch on page 209
Taking the SRE Module Offline in an EX8208 Switch on page 211
Removing an SRE Module from an EX8208 Switch on page 213
Taking the SF Module Offline in an EX8208 Switch on page 214
Removing an SF Module from an EX8208 Switch on page 215
Removing a Line Card from an EX8200 Switch on page 216
Disconnecting a Fiber-Optic Cable from an EX Series Switch on page 219
Removing a Transceiver from an EX Series Switch on page 220
Removing the Power Cord Tray from a Rack or Cabinet for an EX8200 Switch on page 222
The AC power supply in an EX8200 switch is a hot-removable and hot-insertable
field-replaceable unit (FRU). You remove AC power supplies from the front of the chassis.
CAUTION: Before you remove a power supply, ensure that you have power
supplies sufficient to power the switch left in the chassis. See "Calculating
Power Requirements for an EX8208 Switch" on page 108 or Calculating Power
Requirements for an EX8216 Switch.
Before you remove an AC power supply from the switch:
Ensure you understand how to prevent ESD damage. See "Prevention of Electrostatic
Discharge Damage on EX Series Switches" on page 298.
Ensure that you have the following parts and tools available to remove an AC power
supply from an EX8200 switch chassis:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
205