Installing And Enabling Software Options - Cisco D9054 Installation And Operation Manual

Installing and Enabling Software Options

The Web Interface
You can install software options from the web interface.
To Install a Software Option
Before you can install a software option, you need to obtain a license file. For more
information, contact Cisco.
Do as follows to install a new software option:
1. From the user interface of the D9054 HD Encoder click the System tab and then
the Option License icon from the sub-pages.
ROSA automatically displays a list of available options and their status. The
Host ID field uniquely identifies the D9054 HD Encoder you are working on. It
consists of five leading 0s and the serial number of the D9054 HD Encoder.
2. Click the Install... button.
3. Browse for the license file for the option you want to install or enter the path for
the location/directory on your PC and click Open.
Note: It is best to locate the software upgrade file in a directory with a short
path (i.e., c:\temp) due to a character-string limitation with Internet Explorer 6.
Loading takes approximately 10 seconds. The Option is installed in your D9054
HD Encoder. Check that the text in the Installation Status column changes from
Not Installed to Enabled and the Status column from Disabled to Enabled.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-135