Changing The Password For The Web Interface - Cisco D9054 Installation And Operation Manual

Changing the Password for the Web Interface

To Change the Password for the Web Interface
Proceed as follows to change the password for the Web Interface:
1. Log on to the Web Interface.
2. Click the Logon button at the top.
3. Type the user name and new password.
The password can be a maximum of eight ASCII characters.
Important: The password and user name will be remembered for the whole of
the web session. Close the web browser if you want to prevent others from
getting access to the settings of the D9054 HD Encoder.
Hint: If you have forgotten your Web GUI password, you can reset it from the
front panel user interface.
4. Type the new password once more.
5. Click OK.
6. Reset the D9054 HD Encoder.
You reset the D9054 HD Encoder by pressing the Reset button from the System
tab page.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-7