Reading The Module Information - Cisco D9054 Installation And Operation Manual

Reading the Module Information

Proceed as follows to read the module Information:
1. From the user interface of the D9054 HD Encoder, click the System tab and the
Modules icon from the sub-pages.
ROSA automatically displays:
• the system configuration number,
• the part number of the main board, and
• the part number of the embedded software.
The system configuration number is used for showing which modules are
installed in the D9054 HD Encoder.
For each installed module ROSA shows the module name, hardware and
software part number of the module.
If the Encoder has a Multiple Channel Audio (MCA) card that is equipped with
a Dolby Advanced Sub-Module (DASM), the part numbers for the main board
and software are displayed at the end of the Module List (Dolby OEM):
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-131