Setting Up The Test Pattern - Cisco D9054 Installation And Operation Manual

Setting Up the Test Pattern

To Set Up the Test Pattern
Proceed as follows to set up the Test Pattern:
1. From the user interface of the D9054 HD Encoder, click the Video tab and click
the Test icon from the sub-pages.
2. Set the mode of the test pattern.
If this is a test situation, select Always.
3. Set the Test Pattern to Output Muted, 75 Bars or Black.
4. Click Apply.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-41