Viewing The Message Log - Cisco D9054 Installation And Operation Manual

Viewing the Message Log

Important
Normally you use the ROSA message view to see any messages from the D9054 HD
Encoder. For further information, see Viewing Messages, page 5-72. However, if
ROSA/Copernicus has been shut down or there have been network errors, some
messages sent from the D9054 HD Encoder to the ROSA/Copernicus may be lost.
In such cases you can view the messages actually stored in the D9054 HD Encoder
by following the procedure below.
To View the Message Log
Proceed as follows to view the message log:
1. From the user interface of the D9054 HD Encoder, click the System tab and the
Message Log icon from the sub-pages.
ROSA automatically displays:
• the oldest sequence number/message in the message log,
• the latest (most recent) sequence number/message in the message log, and
• the maximum sequence number of a message that can be in the message log.
ROSA also displays a table of the latest 64 messages stored in the D9054 HD
Encoder system.
4038938 Rev A D9054 HDTV Encoder Intstallation and Operation Guide 5-127