Viewing Messages - Cisco D9054 Installation And Operation Manual

Viewing Messages

Before You Begin
Before you can view any messages from the D9054 HD Encoder in ROSA you must
set up the trap destination for the messages. For further information, see Removing
a Trap Destination, page 5-130.
Overview
When viewing messages you can specify which columns to show for each message
and the order in which they are shown. For further information, please see the
ROSA manual.
To View the Messages
Do as follows to view the messages:
1. Right-click the D9054 HD Encoder icon from the Copernicus Server Explorer
tree window.
2. Select All messages or Pending messages.
If you select pending messages you will only see the active messages.
3. Select the message you want to investigate.
The following table shows the most important message columns:
Heading
Msg. Info
Name
Msg. Subject
Hint: Few messages from the D9054 HD Encoder contain additional details. If
you right-click and select Toggle Detail from the menu you may get additional
detailed information.
5-126 D9054 HDTV Encoder Intstallation and Operation Guide
Meaning
The main message description
The detailed message description
The channel in question
4038938 Rev A